Canon G1000, G2000, G3000, G4000 Resetter

Canon  G1000, G2000, G3000, G4000 Resetter 

G Series

G1000 Series: G1000, G1100, G1400, G1900

G2000 Series: G2000, G2100, G2400, G2700, G2900

G3000 Series: G3000, G3100, G3400 ,G3900

G4000 Series: G4000, G4100, G4200, G4400, G4500, G4600, G4800, G4900

Ordinance's first refillable ink tank All-In-One printer is intended for high volume printing at low running expense.

Print, Scan, Copy

ISO Standard print speed (A4): up to 8.8ipm (mono)/5.0ipm (shading)

Prints a 4 x 6" borderless photograph in 60secs

Take after Easy Step to Reset:

Above all else the Printer Driver must be Installed

Printer Should Be Taken to Service Mode {Instruction to Take into Service Mode will Be Sent}

Power off the printer

Interface the printer to the focal unit with a usb link

Hang on the "Resume" catch (triangle around) squeeze "Power"

Hang on these two catches until the point that the drove control lights.

Discharge the "Resume" catch, yet not the power catch, and press 5 times "Resume".

Discharge the two catches. Green Led (In Front of Power Button) will streak, hold up until the point that it stills.

Presently you are in Service Mode. (On the off chance that Orange LED Stills (In Front of Stop/Reset Button) Means Service Mode is Locked)

At that point Extract the record and Open the document STV4905.exe

If it's not too much trouble Verify on Title Bar of Software that {Model Number/Serial No.} of Printer is Shown (Only Proceed if Shown) Otherwise blunder to Service Mode Locked Situation.

Under Clear Ink Counter Tab, Click SET (Load the Paper in Printer Before Clicking)

It Will Print D=0.000 which Shows your Printer is Now Reset to 0% Counter

Kill the Printer when the Turn Off Message is Shown.

Turn ON the Printer when the Turn ON Message is Shown.

Wrap up  Epson l3110 resetter dowaload

* If the Steps are Carried our Correctly it will Reset Your Printer, And Printer will be Live Again!

Rundown of Models Supported Under Service Tool 4905