Canon G1000, G2000, G3000, G4000 Resetter

Canon G1000, G2000, G3000, G4000 Resetter 

Standard Resetter for G1000 G2000 G3000 G4000 Printer

Free download! Epson l3110 resetter dowaload

All upheld standard printer:

E Series: E400, E401, E402, E410, E460, E470, E471, E481, E500, E510, E560, E600, E610.

G Series: G1000, G2000, G3000, G4000

IP Series: IP1200, IP1300, IP1600, IP1700, IP1800, IP1900, IP2200, IP2500, IP2600, IP2700, IP2770, IP2772, IP2870S, IP3600, IP3680, IP4700, IP4800, IP4810, IP4840, IP4850, IP4870, IP4900, IP4910, IP4940, IP4970, IP4980, IP4990, IP5810, IP5880, IP7240, IP7270.

IX Series: IX6500, IX6510, IX6560, IX6840, IX7000, IX6870, IX6770.

MG Series: MG2120, MG2140, MG2240, MG2270, MG2400, MG2440, MG2470, MG2570S, MG3140, MG3540, MG3570, MG3670, MG4140, MG5140, MG5150, MG5170, MG5240, MG5270, MG5340, MG5450, MG5770, MG6140, MG6150, MG6170, MG6240, MG6370, MG7770, MG8140, MG8170, MG8240.

MP Series: MP230, MP237, MP250, MP258, MP260, MP270, MP278, MP280, MP287, MP480, MP490, MP497, MP540, MP550, MP560, MP620, MP630, MP640, MP980, MP990.

MX Series: MX320, MX330, MX377, MX397, MX410, MX497, MX537, MX860.

Genius Series: Pro 9000 Mark II, Pro 9500 Mark II.

Snap HERE! to download!

Take after Easy Step to Reset:

As a matter of first importance the Printer Driver must be Installed

Printer Should Be Taken to Service Mode {Instruction to Take into Service Mode will Be Sent}

Power off the printer

Associate the printer to the focal unit with a usb link

Hang on the "Resume" catch (triangle around) squeeze "Power"

Hang on these two catches until the point that the drove control lights.

Discharge the "Resume" catch, however not the power catch, and press 5 times "Resume".

Discharge the two catches. Green Led (In Front of Power Button) will streak, hold up until the point that it stills.

Presently you are in Service Mode. (In the event that Orange LED Stills (In Front of Stop/Reset Button) Means Service Mode is Locked)

At that point Extract the document and Open the record STV4905.exe

It would be ideal if you Verify on Title Bar of Software that {Model Number/Serial No.} of Printer is Shown (Only Proceed if Shown) Otherwise blunder to Service Mode Locked Situation.

Under Clear Ink Counter Tab, Click SET (Load the Paper in Printer Before Clicking)

It Will Print D=0.000 which Shows your Printer is Now Reset to 0% Counter

Kill the Printer when the Turn Off Message is Shown.

Turn ON the Printer when the Turn ON Message is Shown.

Wrap up

* If the Steps are Carried our Correctly it will Reset Your Printer, And Printer will be Live Again!

Rundown of Models Supported Under Service Tool 4905