Canon Resetter IX6510, IX6560, IX6840, IX7000, IX6870, IX6770

Canon Resetter IX6510, IX6560, IX6840, IX7000, IX6870, IX6770

Squander ink tank full, squander ink cushion full, the ink safeguard is full, blunder 5B00, mistake p07, flicker 7 times, squint 8 times, the ink safeguard turns out to be full, mistake E08, blunder E07.

Printer:Canon Pixma iX6500, iX6510, iX6540, iX6550, iX6560

Reset Canon iX6500 arrangement.Epson l3110 resetter dowaload

Stage 1: Enter Service Mode

1. Kill the printer.

2. Press and hold the Resume catch.

3. Press and hold the Power catch.

4. Discharge the Resume catch (the Power catch is as yet squeezed).

5. Press and discharging the Resume catch 5 times.

6. Press and hold the Resume catch.

7. Discharge the Power and Resume catches together.

After the two catches are discharged, the power marker will squint green for quite a while and afterward the green will light always.

On the off chance that after take after focuses 1-7 the green light not always but rather the printer keeps on demonstrating a blunder, it's mean you committed an error in focuses 1-7. Kill the printer and rehash stage 1.

Stage 2: Reset Canon iX6500 arrangement

To reset the Canon iX6500, iX6510, iX6540, iX6550, iX6560 should be possible with:

a. Administration Tool v.1050

b. Administration Tool v.3400

c. Administration Tool v.3600

d. Administration Tool v.4200

e. Administration Tool v.4720

f. Administration Tool v.4905

a. Reset with Service Tool v.1050

• Download Service Tool (bolster Win XP, Vista, 7, 8, 8.1, 10)

• Extract document and open Service Tool

• Select USB Port (1)

• Load paper

• Clear Ink Counter, click MAIN (2)

• Wait the printer complete the process of printing D=000.0

• Click OK

• Close Service Tool

• Turn off printer (hold up 10 seconds)

• Turn on printer

• Printer prepared for utilize

b. Reset with Service Tool v.3400

• Download Service Tool (bolster Win XP, Vista, 7, 8, 8.1, 10)

• Extract document and open Service Tool

• Load paper

• Clear Ink Counter, select MAIN (1)

• Set (2)

• Wait the printer complete the process of printing D=000.0

• Click OK

• Close Service Tool

• Turn off printer (hold up 10 seconds)

• Turn on printer

• Printer prepared for utilize