Canon Resetter IP1200, IP1300, IP1600, IP1700, IP1800,
IP1900, IP2200, IP2500, IP2600, IP2700, IP2770, IP2772, IP2870S, IP3600,
IP3680
Welcome to my blog. I am a PC specialist. Territory of
repair; PC, workstation, printer, streak drive, microSD, equipment, programming
and another IT issues. I need to share my experience, when I work at my store.
I trust you get what you require in my place. Much appreciated
Stage 1: Enter Service Mode
1. Kill the printer.
2. Press and hold the Resume catch.
3. Press and hold the Power catch.
4. Discharge the Resume catch (the Power catch is as yet
squeezed).
5. Press and discharging the Resume catch 1 time.
6. Press and hold the Resume catch.
7. Discharge the Power and Resume catches together.
After the two catches are discharged, the power marker
will squint green for quite a while and after that the green will light
continually.
In the event that after take after focuses 1-7 the green
light not always but rather the printer keeps on demonstrating a blunder, it's
mean you committed an error in focuses 1-7. Kill the printer and rehash stage
1.
c. Reset with iP Tool v1.1.5
• Download iPTool (bolster Win XP, Vista, 7, 8, 8.1, 10).
• Extract record and open iPTool.
• Click printer display (1)
• Waste ink counter, Reset Main (2)
• Exit iPTool (3)
• Turn off printer (hold up 10 seconds)
• Turn on printer.
• Printer prepared for utilize.
d. Reset with Service Tool av.300
• Download Service Tool (bolster Win XP, Vista, 7, 8,
8.1, 10)
• Extract record and open Service Tool
• Select USB Port (1)
• Device ID (2)
• Lock Release (3)
• Set Destination, select printer display (4)
• Click SET (5)
• Load Paper to the printer
• Clear waste ink counter, select MAIN (6), sit tight for
the printer to get done with printing
• Close Service Tool (7)
• Turn off printer (hold up 10 seconds)
• Turn on printer.
• Printer prepared for utilize
No comments:
Post a Comment