Canon IP1200 Resetter
Welcome to my blog. I am a PC expert. Region of repair;
PC, workstation, printer, streak drive, microSD, equipment, programming and
another IT issues. I need to share my experience, when I work at my store. I
trust you get what you require in my place. Much obliged
Stage 1: Enter Service Mode
1. Kill the printer.
2. Press and hold the Resume catch.
3. Press and hold the Power catch.
4. Discharge the Resume catch (the Power catch is as yet
squeezed).
5. Press and discharging the Resume catch 1 time.
6. Press and hold the Resume catch.
7. Discharge the Power and Resume catches together.
After the two catches are discharged, the power pointer
will squint green for quite a while and afterward the green will light
continually.
On the off chance that after take after focuses 1-7 the
green light not always but rather the printer keeps on demonstrating a blunder,
it's mean you committed an error in focuses 1-7. Kill the printer and rehash
stage 1.
Issue:
Squander ink tank full, squander ink cushion full, the
ink safeguard is full, blunder 5B00, mistake P07, flicker 7 times, squint 8
times, the ink safeguard turns out to be full, blunder E08, blunder E07,
mistake 6C10, mistake 5B02.
a. Reset with General Tool v1.29
• Download General Tool (bolster Win XP, Vista, 7, 8,
8.1, 10).
• Extract record and open General Tool.
• Select USB Port (1)
• Device ID (2)
• Lock Release (3)
• Set Destination, select printer display (4)
• Load Paper to the printer
• Clear waste ink counter, select MAIN (5), sit tight for
the printer to get done with printing
• Close General Tool (6)
• Turn off printer (hold up 10 seconds)
• Turn on printer.
• Printer prepared for utilize.
b. Reset with iPTool v0.9.2
• Download iPTool (bolster Win XP, Vista, 7, 8, 8.1, 10).
• Extract document and open iPTool.
• Click printer demonstrate (1)
• Waste ink counter, Reset Main (2)
• Exit iPTool (3)
• Turn off printer (hold up 10 seconds)
• Turn on printer.
• Printer prepared for utilize.
No comments:
Post a Comment